Removal of arsenic species from water by batch and column operations on bagasse fly ash

Bagasse fly ash (BFA, a sugar industrial waste) was used as low-cost adsorbent for the uptake of arsenate and arsenite species from water. The optimum conditions for the removal of both species of arsenic were as follows: pH 7.0, concentration 50.0 μg/L, contact time 50.0 min, adsorbent dose 3.0 g/L, and temperature 20.0 °C, with 95.0 and 89.5 % removal of arsenate and arsenite, respectively. The Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich adsorption isotherms were used to analyze the results. The results of these models indicated single-layer uniform adsorption on heterogeneous surface. Thermodynamic parameters, i.e., ΔG°, ΔH°, and ΔS°, were also calculated. At 20.0 to 30.0 °C, the values of ΔG° lie in the range of ?4,722.75 to ?4,878.82 and ?4,308.80 to ?4,451.73 while the values of ΔH° and ΔS° were ?149.90 and ?121.07, and 15.61 and 14.29 for arsenate and arsenite, respectively, indicating that adsorption is spontaneous and exothermic. Pseudo-first-order kinetics was followed. In column experiments, the adsorption decreased as the flow rate increased with the maximum removal of 98.9 and 95.6 % for arsenate and arsenite, respectively. The bed depth service time and Yoon and Nelson models were used to analyze the experimental data. The adsorption capacity (N _o) of BFA on column was 3.65 and 2.98 mg/cm³ for arsenate and arsenite, respectively. The developed system for the removal of arsenate and arsenite species is economic, rapid, and capable of working under natural conditions. It may be used for the removal of arsenic species from any contaminated water resources.     

Effect of Curing Temperature on Mechanical Properties of Bio-phenolic/Epoxy Polymer Blends

Journal of Polymers and the Environment - Nowadays, researchers continue studies for alternative materials to replace the redundant petroleum-based products. The combination of various polymer...     

Treatment of urban stormwater for dissolved pollutants: A comparative study of natural organic filter media

Sorption capacities were evaluated for the dissolved stormwater (SW) pollutants onto two tree mulches and jute fiber. SW spiked with predetermined concentrations of copper (Cu), cadmium (Cd), hexavalent chromium (Cr ⁺⁶), lead (Pb), zinc (Zn), and benzo[a]pyrene (B[a]P), naphthalene (NP), fluoranthene (FA), 1,3‐dichlorobenzene (DCB), and butylbenzylphthalate (BBP) were used in this study. Each medium removed close to 100 percent of all the pollutants at the concentrations studied. Sorption capacities (μg/g) of the three organic media were in the order of jute > hardwood mulch > softwood mulch, and on a mole basis, both the heavy metals and the toxic organics were sorbed by the three media in an identical sequence: Cr ⁺⁶ > Cu, Zn > Cd > Pb; and NP > DCB > FA > B[a]P > BBP. Sorption capacities of the hardwood wood mulch and jute fiber for the pollutants were correlated with distinctive physical properties of the pollutants. © 2005 Wiley Periodicals, Inc.     

A “justice” reading of the trans-national struggle of the people displaced by the Merowe Dam

ABSTRACT

This paper applies a “justice” lens to the struggle of the people displaced by the Merowe Dam in northern Sudan. Application of distributive, procedural, and representational aspects of justice exposes the dissatisfaction of the affected people with the government’s offer and execution of compensation. Consideration of social justice and the utility of norms in trans-national activism brings into sharp focus the difference in interests, and abilities of the many actors involved, and highlights the government’s tactics to divide the communities, and the social divisions sown. As the struggle develops, justice claims are seen to change towards less material issues, suggesting that an expanded and dynamic conception of justice is more helpful than narrow or time-bound conceptions. The findings are of relevance to communities facing possible displacement from dams planned nearby, not least of all for the insight provided on the effectiveness of different tactics in the struggle.     

Organizing preliminary storage sites of organic material,waste fuels and recyclables and their separating distance from populated areas

European Union directives have urged member countries to enhance the recycling and separation of waste fractions, and this has increased the number of temporary storage sites of recyclables and waste fuels. Spontaneous fires at temporary storage sites have become common and pose social/health/environmental risks. Storage sites should be sited sufficiently far from populated regions, so that the concentration of released pollutants from open fires falls below the critical air quality index before the plume reach the downwind population. In this study, the open-burn/open-detonation model developed by the US Environmental Protection Agency was employed, and 540 simulations were performed for nine scenarios of open burning of household waste to estimate suitable sizes of storage heaps and adequate distances between storage sites and populated regions. Furthermore, sensitivity analysis was performed for 1,080 additional simulations to determine the effects of variations in the burn rate, storage dimension and volume of the waste heap on the model output. The resulting chart can be directly employed by waste operators/environmental agencies to organize storage sites to minimize externalities due to open fires. Furthermore, using ArcGIS software, first-cut information of the total Swedish population facing the risk of hazards due to spontaneous fires was provided.     

Graphene and its derivatives: synthesis,modifications, and applications in wastewater treatment

Graphene was discovered in 2004 and has attracted intensive interests because of its unique mechanical, electric, thermal, optical, and structural properties, which makes graphene a potential candidate for various applications. Graphene is being used as a composite or filler material with metals, metal oxides, and polymers for potential advanced applications in solar cells, lithium-ion batteries, photocatalysis and sensing. These applications depend upon the distinctive properties of graphene, which in turn depend on the adopted synthetic approach. This article reviews the recent developments in synthesis of graphene and related composite materials. The synthesis of graphene through exfoliation, epitaxial growth and direct growth via carbon source, and modification approaches by covalent and noncovalent methodologies are discussed. Graphene-based metal and metal oxide composites for the purification of wastewater using photolytic process are also presented.     

Characterization of municipal solid waste temporary storage sites: Risks posed to surrounding areas as a consequence of fire incidents

In this study temporary storage sites of municipal solid waste were characterized based on their potential social, health and environmental impacts as a consequence of spontaneous fires, by employing Boolean as well as weighted-linear-combination approaches in connection with various fuzzy set functions of population density around the storage sites. Sweden was used as the case study and data from 105 storage sites were analysed; of these, 38 were identified to be posing high risk for downwind residing population. Furthermore, during the past 10 years, the fire frequency and the average population residing within a radius of 1, 2, and 3 km were found to be comparatively higher for storage sites owned by private companies than for those owned by municipalities. The study provided first-cut information of poorly sited temporary storage sites and can help in formalizing the comprehensive risk analysis in the future.     

Removal of arsenate from groundwater by electrocoagulation method

Purpose

Arsenic, a toxic metalloid in drinking water, has become a major threat for human beings and other organisms. In the present work, attempts have been made to remove arsenate from the synthetic as well as natural water of Ballia district, India by electrocoagulation method. Efforts have also been made to optimize the various parameters such as initial arsenate concentration, pH, applied voltage, processing time, and working temperature.

Method

Electrocoagulation is a fast, inexpensive, selective, accurate, reproducible, and eco-friendly method for arsenate removal from groundwater. The present paper describes an electrocoagulation method for arsenate removal from groundwater using iron and zinc as anode and cathode, respectively.

Results

The maximum removal of arsenate was 98.8% at 2.0?mg?L^?1, 7.0, 3.0?V, 10.0?min, and 30°C as arsenate concentration, pH, applied voltage, processing time, and working temperature, respectively. Relative standard deviation, coefficient of determination (r ²), and confidence limits were varied from 1.50% to 1.59%, 0.9996% to 0.9998%, and 96.0% to 99.0%, respectively. The treated water was clear, colorless, and odorless without any secondary contamination. The developed and validated method was applied for arsenate removal of two samples of groundwater of Ballia district, U.P., India, having 0.563 to 0.805?mg?L^?1, arsenate concentrations.

Conclusions

The reported method is capable for the removal of arsenate completely (100% removal) from groundwater of Ballia district. There was no change in the groundwater quality after the removal of arsenate. The treated water was safe for drinking, bathing, and recreation purposes. Therefore, this method may be the choice of arsenate removal from natural groundwater.     

Treatment of MTBE using fenton's reagent

This article addresses the removal of methyl tertiary‐butyl ether (MTBE) from water, using Fenton's Reagent. Although complete mineralization of MTBE by Fenton's Reagent was not achieved, greater than 99 percent destruction of MTBE was realized. This was accomplished at a Fe⁺²:H₂O₂ ratio of 1:1 and 1 hour of contact time. In all tests, twice the stoichiometric ratio of H₂O₂ to MTBE was used. The major by‐products were tertiary‐butyl alcohol, tertiary‐butyl formate, and acetone with traces of 2‐methyl‐1‐propene (isobutylene). While small quantities of O₂ evolved, no significant quantity of CO₂ gas was detected.